![]() ![]() The beacon information section displays status information about the connected device. If a name containing more than 32 characters is applied as part of the changes, it will be ignored. To edit the beacon name, start by tapping on the beacon name edit box under the “Beacon Name” label.The beacon name can be set to a maximum length of 32 characters. The Beacon Detail screen contains fields for configuring the beacon parameters, and fields that display beacon status information. Note: If the Beacon list remains empty after 15 seconds of scanning, we can assume there are no RadBeacon E devices in range. Next, you should see a progress icon with a message indicating that scanning has started, as shown below.Īfter a few seconds of scanning, the home screen should list the available in-range devices. The device scanning process is initiated by pulling down on the home screen of the RadBeacon E App. The RadBeacon E App allows users to configure their RadBeacon E4 device parameters. Only while in configuration-mode the beacon will broadcast connectable advertisements. The beacon will remain in configuration-mode for the next 10 minutes. The blue LED will blink twice to confirm beacon has entered configuration-mode. Configuration-mode is entered after pressing and releasing the button while not in configuration-mode. The button on the side of the beacon is used for enabling configuration-mode. Refer to the slot configuration section below for details on how to enable/disable a slot. The E4 can be switched off by disabling all the 5-slots on the beacon using the RadBeacon E app. The RadBeacon E4 allows for user configuration via the RadBeacon E App available for iOS and Android devices. The RadBeacon E4 is powered from 4 user-replaceable AA batteries. The RadBeacon E4 can be configured to advertise data in up to 5 individual slots. The RadBeacon E4 supports the 4 most popular beacon protocols iBeacon, AltBeacon, Eddystone UID, and Eddystone URL. Merchants can work with their Customer Success team to determine which areas of interest might make the most sense for their use cases.The RadBeacon E4 is the next generation Radius Networks Bluetooth™ Smart proximity multi-beacon device. There is a limit to 20 areas of interest per project. Areas of interest are set at the project level, but can be used at all configured sites. Each area of interest corresponds to one region within the merchant’s store where a beacon will be placed (ie “checkout”, “bakery”, etc.). Expired: the campaign has run its duration! It will move to “expired” automatically once the “end date” is met.Īreas of interest are one of the three targeting types for a campaign.Withdrawn: if a campaign is withdrawn, Flybuy will remove the campaign from the app user’s device at the next available sync (syncs typically happen once a day, locally).Published campaigns cannot be edited but can be withdrawn. Published: your campaign is live! Flybuy will then send campaign information locally to all app users upon the next launch of the app within the determined duration of the campaign.Draft : your opportunity to get the campaign ready to go! While in draft mode you can edit, duplicate, or publish.Ĭampaigns can have a status of: draft, published, withdrawn, or expired. URL: this link tells Flybuy where to send the user if they tap a notification triggered by Notify (in-app experience or web experience, determined by merchant).Body: used for the main messaging within a notification (ex: Scan your rewards code to earn points on your purchase.).Title: used for the user-facing title of a notification (ex: The Market Rewards).The content defines the information that is presented to the user in the merchant’s app experience. Merchants have the ability to select a date range and select the frequency of the Notify campaign (trigger once a day trigger once during the lifetime of the campaign). The duration defines the time that the campaign is active. A single beacon typically can be configured for a 5 - 20 meter range. Area of interest: uses one particular beacon within the site to trigger the campaign.Entering: uses any beacon configured with the site to trigger the campaign.Approaching: uses a geofence, set by the merchant (ex: 100 meters away from center of site address), to trigger the campaign. ![]() There are three primary targets that Notify will key off of: Each campaign is configured with a target, a duration, and content. Campaigns define what and when a user will be presented with a location-triggered notification experience.Ĭampaigns are defined in the Flybuy Merchant Portal at the project level and apply to all sites within a merchant’s project. Notify campaigns offer merchants the ability to centrally manage content that Flybuy will use to engage customers. Update Table of Contents Campaigns Targets Duration Content Example campaigns at one site ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |